CONDENSER(for 1WW) INSTALLATION

PROCEDURE


  1. INSTALL CONDENSER WITH RECEIVER ASSEMBLY


    1. A01TBYI

      Engage the 2 guides to install the condenser with receiver assembly as shown in the illustration.

      Note

      Do not damage the condenser with receiver assembly or radiator when installing the condenser with receiver assembly.

      Tech Tips

      If a new condenser with receiver assembly is installed, add compressor oil to the condenser with receiver assembly as follows.

      Capacity
      Add 40 cc (1.35 fl. oz)
      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

  2. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY RH

    Click here

  3. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY LH

    Click here

  4. INSTALL UPPER RADIATOR SUPPORT

    Click here

  5. CONNECT AIR CONDITIONER TUBE ASSEMBLY


    1. Remove the vinyl tape from the air conditioner tube assembly and the connecting part of the condenser with receiver assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

    3. Install the O-ring to the air conditioner tube assembly.

    4. Connect the air conditioner tube assembly to the condenser with receiver assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  6. CONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. Remove the vinyl tape from the discharge hose sub-assembly and the connecting part of the condenser with receiver assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

    3. Install the O-ring to the discharge hose sub-assembly.

    4. Connect the discharge hose sub-assembly to the condenser with receiver assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  7. INSTALL RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY

    Click here

  8. INSTALL NO. 3 RADIATOR AIR GUIDE

    Click here

  9. INSTALL HOOD LOCK ASSEMBLY

    Click here

  10. INSTALL HEADLIGHT ASSEMBLY LH

    Click here

  11. INSTALL HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  12. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (for HFC-134a(R134a))

    Click here

  13. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (for HFO-1234yf(R1234yf))

    Click here

  14. WARM UP ENGINE (for HFC-134a(R134a))

    Click here

  15. WARM UP ENGINE (for HFO-1234yf(R1234yf))

    Click here

  16. INSPECT FOR REFRIGERANT LEAK (for HFC-134a(R134a))

    Click here

  17. INSPECT FOR REFRIGERANT LEAK (for HFO-1234yf(R1234yf))

    Click here

  18. ADJUST HOOD SUB-ASSEMBLY

    Click here