CONDENSER(for 1WW) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE HOOD LOCK ASSEMBLY

    Click here

  5. REMOVE NO. 3 RADIATOR AIR GUIDE

    Click here

  6. REMOVE RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY

    Click here

  7. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01LYGZ

      Remove the bolt and disconnect the discharge hose sub-assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY


    1. A01LYI5

      Remove the bolt and disconnect the air conditioner tube assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the air conditioner tube assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  9. REMOVE UPPER RADIATOR SUPPORT

    Click here

  10. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY LH

    Click here

  11. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY RH

    Click here

  12. REMOVE CONDENSER WITH RECEIVER ASSEMBLY


    1. A01LYS3

      Disengage the 2 guides and remove the condenser with receiver assembly as shown in the illustration.

      Note

      Do not damage the condenser with receiver assembly or radiator when removing the condenser with receiver assembly.