CONDENSER(except 1WW, 8NR-FTS) INSTALLATION

PROCEDURE


  1. INSTALL CONDENSER WITH RECEIVER ASSEMBLY


    1. B0042X3

      Engage the 2 guides to install the condenser with receiver assembly as shown in the illustration.

      Note

      Do not damage the condenser with receiver assembly or radiator when installing the condenser with receiver assembly.

      Tech Tips

      If a new condenser with receiver assembly is installed, add compressor oil to the condenser with receiver assembly as follows.

      Capacity
      Add 40 cc (1.35 fl. oz)
      Compressor Oil
      ND-OIL 8 or equivalent

  2. CONNECT AIR CONDITIONER TUBE ASSEMBLY


    1. Remove the vinyl tape from the air conditioner tube assembly and the connecting part of the condenser with receiver assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the tube joint.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

    3. Install the O-ring to the air conditioner tube assembly.

    4. Connect the air conditioner tube assembly to the condenser with receiver assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. CONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. Remove the vinyl tape from the discharge hose sub-assembly and the connecting part of the condenser with receiver assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the hose joint.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

    3. Install the O-ring to the discharge hose sub-assembly.

    4. Connect the discharge hose sub-assembly to the condenser with receiver assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. INSTALL NO. 2 FAN SHROUD


    1. Engage the 2 guides and 2 claws.

    2. Install the No. 2 fan shroud with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    3. Engage the clamp to connect the No. 3 water by-pass hose to the No. 2 fan shroud.

  5. INSTALL NO. 1 RADIATOR SUPPORT (for 1ND-TV)

    Click here

  6. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 1ND-TV)

    for Sedan: Click here

    except Sedan: Click here

  7. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 1NR-FE)

    for Sedan: Click here

    except Sedan: Click here

  8. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 1ZR-FAE)

    for Sedan: Click here

    except Sedan: Click here

  9. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 1ZR-FE)

    Click here

  10. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 2ZR-FE)

    Click here

  11. INSTALL HOOD LOCK ASSEMBLY (for Sedan)

    Click here

  12. CONNECT NO. 1 WATER HOSE CLAMP BRACKET (for 1ND-TV)

    for Sedan: Click here

    except Sedan: Click here

  13. CONNECT NO. 1 WATER HOSE CLAMP BRACKET (for 1NR-FE)

    for Sedan: Click here

    except Sedan: Click here

  14. CONNECT NO. 1 WATER HOSE CLAMP BRACKET (for 1ZR-FAE)

    for Sedan: Click here

    except Sedan: Click here

  15. CONNECT NO. 1 WATER HOSE CLAMP BRACKET (for 1ZR-FE)

    Click here

  16. CONNECT NO. 1 WATER HOSE CLAMP BRACKET (for 2ZR-FE)

    Click here

  17. INSTALL BATTERY CLAMP SUB-ASSEMBLY


    1. Install the battery clamp sub-assembly and battery clamp bolt with the bolt and nut.

      Torque:
      Bolt
      16.5 N*m  { 168 kgf*cm, 12 ft.*lbf }
      Nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

  18. INSTALL HEADLIGHT ASSEMBLY LH (for Sedan)

    Click here

  19. INSTALL HEADLIGHT ASSEMBLY RH (for Sedan)

    Tech Tips

    Use the same procedure as for the LH side.

  20. INSTALL HEADLIGHT ASSEMBLY LH (except Sedan)

    for 1ND- TV: Click here

  21. INSTALL HEADLIGHT ASSEMBLY RH (except Sedan)

    for 1ND- TV:

    Tech Tips

    Use the same procedure as for the LH side.

  22. INSTALL FRONT BUMPER ASSEMBLY (for Sedan)

    Click here

  23. INSTALL FRONT BUMPER ASSEMBLY (except Sedan)

    Click here

  24. ADJUST HOOD SUB-ASSEMBLY

    for Sedan: Click here

    except Sedan: Click here

  25. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (for HFC-134a(R134a))

    Click here

  26. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (for HFO-1234yf(R1234yf))

    Click here

  27. WARM UP ENGINE (for HFC-134a(R134a))

    Click here

  28. WARM UP ENGINE (for HFO-1234yf(R1234yf))

    Click here

  29. INSPECT FOR REFRIGERANT LEAK (for HFC-134a(R134a))

    Click here

  30. INSPECT FOR REFRIGERANT LEAK (for HFO-1234yf(R1234yf))

    Click here