CONDENSER(for 8NR-FTS) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

    Click here

  3. REMOVE HEADLIGHT ASSEMBLY LH

    Click here

  4. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE HOOD LOCK ASSEMBLY

    Click here

  6. REMOVE NO. 3 RADIATOR AIR GUIDE


    1. A01TC6MC01
      A01TCE3 Clip
      A01TBGJ Screw

      Remove the 2 clips and 2 screws.

    2. Disengage the claw and remove the No. 3 radiator air guide.

  7. REMOVE RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY


    1. A01TCUF

      Disconnect the connector.

    2. Remove the 2 bolts and radiator support to cross member brace sub-assembly.

  8. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01TDNK

      Remove the bolt and disconnect the discharge hose sub-assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  9. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY


    1. A01T9JP

      Remove the bolt and disconnect the air conditioner tube assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the air conditioner tube assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  10. REMOVE CONDENSER WITH RECEIVER ASSEMBLY


    1. A01TDBE

      Disengage the 2 claws and 2 guides, and remove the condenser with receiver assembly as shown in the illustration.

      Note

      Do not damage the condenser with receiver assembly or radiator when removing the condenser with receiver assembly.