CONDENSER(for 1AD-FTV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  3. REMOVE RADIATOR SUPPORT LH

    Click here

  4. REMOVE RADIATOR SUPPORT RH

    Click here

  5. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY LH

    Click here

  6. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY RH

    Click here

  7. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01M3FC

      Remove the bolt and disconnect the discharge hose sub-assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  8. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY


    1. A01M2BV

      Remove the bolt and disconnect the air conditioner tube assembly from the condenser with receiver assembly.

    2. Remove the O-ring from the air conditioner tube assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  9. REMOVE CONDENSER WITH RECEIVER ASSEMBLY


    1. A01LVHI

      Remove the bolt.

    2. A01LZQZ

      Disengage the 2 guides and remove the condenser with receiver assembly as shown in the illustration.

      Note

      Do not damage the condenser with receiver assembly or radiator when removing the condenser with receiver assembly.