COMPRESSOR(for 2ZR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE V-RIBBED BELT

    Click here

  3. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A012HJJ

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A012JSH

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A012F64

      Disconnect the connector.

    2. Disengage the clamp.

    3. A012GDVC05
      A012M0O Bolt
      A012L0C Nut

      Remove the 2 bolts and 2 nuts.

    4. A012IBP

      Using an E8 "TORX" socket, remove the 2 stud bolts.

    5. Remove the compressor assembly with pulley.