ROOM TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

   
   

   1. Connect the connector and aspirator.

   2. Engage the 2 claws to install the cooler (room temp. sensor) thermistor.

2. INSTALL NO. 1 SWITCH HOLE BASE (except Sedan)

   for LHD:

   Click here

   for RHD:

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (except Sedan)

   Click here

4. INSTALL NO. 1 METER HOOD CLUSTER (except Sedan)

   Click here

5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)

   Click here

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)

   Click here

7. INSTALL NO. 1 SWITCH HOLE BASE (for Sedan)

   for LHD:

   Click here

   for RHD:

   Click here

8. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)

   Click here

9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)

   Click here

10. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

11. INSTALL NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY (for Sedan)

    Click here

12. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD with Entry and Start System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here