ROOM TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

   
   

   1. Connect the connector and aspirator.

   2. Engage the 2 claws to install the cooler (room temp. sensor) thermistor.

2. INSTALL NO. 1 SWITCH HOLE BASE (for LHD)

   Click here

3. INSTALL NO. 1 SWITCH HOLE BASE (for RHD)

   Click here

4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

5. INSTALL NO. 1 METER HOOD CLUSTER

   Click here

6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

7. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD with Entry and Start System)

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here