COMPRESSOR(for 8NR-FTS) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A00310R

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A0030T0

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  7. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A00319S

      Disconnect the connector.

    2. A0030WQC01
      A0030PX Bolt
      A003094 Nut

      Remove the 2 bolts and 2 nuts.

    3. A003050

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts.

    4. Remove the compressor assembly with pulley.