COMPRESSOR(for 1AD-FTV) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE V-RIBBED BELT

    Click here

  3. REMOVE FRONT LOWER BUMPER ABSORBER

    Click here

  4. REMOVE FRONT ENGINE MOUNTING BRACKET LOWER REINFORCEMENT (w/ Reinforcement)

    Click here

  5. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Click here

  6. REMOVE FRONT CROSS MEMBER SUB-ASSEMBLY

    Click here

  7. REMOVE NO. 3 AIR HOSE

    Click here

  8. REMOVE NO. 2 AIR TUBE

    Click here

  9. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01M2RF

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  10. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A01LXBM

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  11. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A01M2RJ

      Disconnect the connector.

    2. A01M1NY

      Remove the 4 bolts and compressor assembly with pulley.