COOLER EXPANSION VALVE REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Cooler System)

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here

  2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (for 1WW, 1ND-TV)

    Click here

  3. REMOVE WATER GUARD PLATE LH (for 1WW, 1ND-TV)

    for LHD:

    for Sedan: Click here

    for Hatchback, Wagon: Click here

    for RHD:

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for 1WW, 1ND-TV)

    for LHD:

    for Sedan: Click here

    for Hatchback, Wagon: Click here

    for RHD:

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  5. REMOVE OUTER COWL TOP PANEL (for 1WW, 1ND-TV)

    for LHD:

    for Sedan: Click here

    for Hatchback, Wagon: Click here

    for RHD:

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  6. REMOVE COOLER CAP (w/o Cooler System)

    Click here

  7. DISCONNECT SUCTION PIPE SUB-ASSEMBLY (w/ Cooler System)

    w/o Sub-cool Accelerator:

    Click here

  8. DISCONNECT AIR CONDITIONER TUBE ASSEMBLY (w/ Cooler System)

    w/o Sub-cool Accelerator:

    Click here

  9. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (w/ Cooler System)

    w/ Sub-cool Accelerator:

    Click here

  10. REMOVE COOLER EXPANSION VALVE


    1. B0044KJ

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    2. w/o Sub-cool Accelerator:


      1. B00450TC01
        *a Bolt for Suction Pipe Sub-assembly

        Temporarily install the bolt for the suction pipe sub-assembly halfway to the cooler expansion valve.

    3. w/ Sub-cool Accelerator:


      1. B00450TC01
        *a Bolt for Air Conditioner Tube and Accessory Assembly

        Temporarily install the bolt for the air conditioner tube and accessory assembly halfway to the cooler expansion valve.

    4. B0042FU

      Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.

    5. B0043FQC01
      *1 No. 1 Cooler Evaporator Sub-assembly

      Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.