PTC HEATER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A00YAETC09
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A6-1 (B) - A7-1 (E) Always Below 1 Ω
      A6-2 (B) - A7-1 (E) Always Below 1 Ω
      A6-2 (B) - A7-2 (E) Always Below 1 Ω
      A6-3 (B) - A7-2 (E) Always Below 1 Ω

      • If the result is not as specified, replace the quick heater assembly.