AIR CONDITIONING UNIT DISASSEMBLY

PROCEDURE


  1. REMOVE QUICK HEATER ASSEMBLY (for Cold Area)

    Click here

  2. REMOVE NO. 2 HEATER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)


    1. Disengage the 2 clamps.

    2. A01LYE3

      Using a screwdriver, disengage the 3 claws to remove the No. 2 heater control cable sub-assembly.

  3. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)


    1. A01LWGU

      Using a screwdriver, disengage the 3 claws to remove the air mix damper control cable sub-assembly.

  4. REMOVE MODE DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


    1. A01LY8G

      Remove the 3 screws and mode damper servo sub-assembly.

  5. REMOVE AIR MIX DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


    1. for Single Type:


      1. A01M2QP

        Remove the 2 screws and air mix damper servo sub-assembly.

    2. for Dual Type:


      1. A01M0M8

        Remove the 3 screws and air mix damper servo sub-assembly.

  6. REMOVE NO. 2 AIR MIX DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


    1. for Dual Type:


      1. A01LXZ8

        Remove the 3 screws and No. 2 air mix damper servo sub-assembly.

  7. REMOVE HEATER COVER BRACKET (for Hatchback, Wagon)


    1. A01M2W4

      Remove the screw and heater cover bracket.

  8. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY (for Hatchback, Wagon)


    1. A01M3BF

      Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly as shown in the illustration.

  9. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY (for Sedan)


    1. A01M06D

      Remove the screw and clamp.

    2. A01M3BF

      Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly as shown in the illustration.

  10. REMOVE COOLER EXPANSION VALVE


    1. A01LW4D

      Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.

  11. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


    1. A01M1D5

      Remove the 4 screws.

    2. Disengage the 2 claws and 2 guides, and remove the lower heater case.

    3. A01LZZ6

      Disengage the clamp.

    4. Remove the No. 1 cooler evaporator sub-assembly with the front evaporator temperature sensor (No. 1 cooler thermistor) from the upper heater case.

    5. Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

  12. REMOVE NO. 1 COOLER THERMISTOR

    Click here