AIR CONDITIONING UNIT COMPONENTS
ILLUSTRATION
| *A | for 1AD-FTV, 1ND-TV | *B | for 1AD-FTV |
| *C | for LHD | - | - |
| *1 | DIFFERENTIAL PRESSURE SENSOR ASSEMBLY | *2 | NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL |
| *3 | OUTER COWL TOP PANEL | *4 | WATER GUARD PLATE LH |
 |
N*m (kgf*cm, ft.*lbf) : Specified torque | - | - |
ILLUSTRATION
| *A | for 1ND-TV | *B | for RHD |
| *1 | NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL | *2 | OUTER COWL TOP PANEL |
| *3 | WATER GUARD PLATE LH | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/ Cooler System | *B | w/o Cooler System |
| *1 | AIR CONDITIONER TUBE ASSEMBLY | *2 | COOLER CAP |
| *3 | HEATER WATER INLET HOSE A | *4 | HEATER WATER OUTLET HOSE A |
| *5 | SUCTION PIPE SUB-ASSEMBLY | *6 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Compressor oil ND-OIL 8 or equivalent | - | - |
ILLUSTRATION
| *A | for RHD | *B | for LHD |
| *C | w/ Cooler System | - | - |
| *1 | COOLER (ROOM TEMP. SENSOR) THERMISTOR | *2 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for Cold Area | *B | w/ ECU Integration Box RH |
| *C | for RHD | *D | for LHD |
| *1 | CENTER INSTRUMENT PANEL TO COWL BRACE | *2 | DEFROSTER NOZZLE ASSEMBLY |
| *3 | INSTRUMENT PANEL WIRE | *4 | REAR NO. 1 AIR DUCT |
| *5 | ECU INTEGRATION BOX RH | *6 | FRONT FLOOR CARPET ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | AIR CONDITIONER UNIT ASSEMBLY | *2 | INSTRUMENT PANEL REINFORCEMENT ASSEMBLY |
| *3 | NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY | *4 | NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o Cooler System | *B | w/ Cooler System |
| *C | except Cold Area | *D | for Dual Type |
| *E | for Single Type | - | - |
| *1 | AIR CONDITIONING AMPLIFIER ASSEMBLY | *2 | AIR CONDITIONING HARNESS ASSEMBLY |
| *3 | AIR CONDITIONING RADIATOR ASSEMBLY | *4 | ASPIRATOR |
| *5 | ASPIRATOR PIPE | *6 | CONSOLE MOUNTING BRACKET LH |
| *7 | CONSOLE MOUNTING BRACKET RH | *8 | DRAIN COOLER HOSE |
| *9 | HEATER COVER | *10 | NO. 2 AIR DUCT SUB-ASSEMBLY |
| *11 | NO. 3 AIR DUCT SUB-ASSEMBLY | - | - |
ILLUSTRATION
| *A | for Cold Area | *B | for Dual Type |
| *C | for Single Type | - | - |
| *1 | AIR MIX DAMPER SERVO SUB-ASSEMBLY | *2 | COOLER EXPANSION VALVE |
| *3 | HEATER RADIATOR UNIT SUB-ASSEMBLY | *4 | MODE DAMPER SERVO SUB-ASSEMBLY |
| *5 | NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY | *6 | NO. 1 COOLER THERMISTOR |
| *7 | NO. 2 AIR MIX DAMPER SERVO SUB-ASSEMBLY | *8 | QUICK HEATER ASSEMBLY |
| *9 | UPPER HEATER CASE | *10 | CLAMP |
| *11 | O-RING | *12 | LOWER HEATER CASE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 8 or equivalent | - | - |