AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) INITIALIZATION


  1. INITIALIZATION SERVO MOTOR


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Press the A/C OFF switch.

    5. Turn the GTS on.

    6. Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

    7. According to the GTS display, perform servomotor initialization.


      Body Electrical > Air Conditioner > Utility
      Tester Display
      Servomotor Initialization

      Tech Tips

      During initialization, the AUTO indicator light comes on, and then goes off when initialization has finished.

    8. According to the GTS display, select the Exit switch to finish initialization.