PROCEDURE
INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
Engage the guide and install the rear seat inner with center belt assembly RH with the bolt.
Check that the ELR locks.
Note
The check should be performed with the rear seat inner with center belt assembly RH installed.
With the rear seat inner with center belt assembly RH installed, check that the belt locks when it is pulled out quickly.
|
Protruding Part |
Connect the floor anchor of the rear seat inner with center belt assembly RH with the bolt.
Note
Install the rear seat inner with center belt assembly RH with the arrow on the anchor part facing the front of the vehicle.
Do not allow the anchor part of the rear seat inner with center belt assembly RH to overlap the protruding parts of the floor panel.
w/ Rear Seat Belt Warning:
Connect the connector.
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
INSTALL PACKAGE TRAY TRIM BELT HOLE COVER
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR SEAT SIDE GARNISH LH
INSTALL REAR SEAT SIDE GARNISH RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side)
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)
Tech Tips
Use the same procedure as for the LH side.
CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH
CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR SEAT ASSEMBLY