FRONT SEAT INNER BELT ASSEMBLY(for Sedan) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR DRIVER)


    1. A00Y5RQC01
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Driver))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Driver seat belt unfastened Below 1 Ω
      2 - 3 Driver seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for driver).

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR FRONT PASSENGER)


    1. A00Y9VWC01
      *A for LHD
      *B for RHD
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Front Passenger))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      L16-3 - B-1 Always Below 1 Ω
      L16-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
      L16-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher
      for RHD
      Tester Connection Condition Specified Condition
      L15-3 - B-1 Always Below 1 Ω
      L15-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
      L15-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for front passenger).