OCCUPANT DETECTION SENSOR(for Sedan) INSTALLATION

PROCEDURE


  1. INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)


    1. Temporarily install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover.

    2. A012J81

      Using hog ring pliers, install 17 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    3. A012G97

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  4. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  5. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  6. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  7. INSTALL FRONT SEAT INNER BELT ASSEMBLY

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here