REAR SEAT OUTER BELT ASSEMBLY(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    Click here

  2. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. A0030XRN01

      Engage the guide and temporarily install the rear seat 3 point type outer belt assembly with the 2 bolts.

    2. Fully tighten the bolt (A) first, then the bolt (B).

      Torque:
      Bolt (A)
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
      Bolt (B)
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    3. Check if the ELR locks.

      Note

      The check should be performed with the rear seat 3 point type outer belt assembly installed.


      1. With the rear seat 3 point type outer belt assembly installed, check that the belt locks when it is pulled out quickly.

    4. A0030BBC01
      A00301U Protruding Part

      Connect the floor anchor of the rear seat 3 point type outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor parts of the rear seat 3 point type outer belt assembly to overlap the protruding parts of the floor panel.

  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    1. Engage the 5 guides and 3 clips to install the package tray trim panel assembly.

    2. Connect the connector.

  4. INSTALL PACKAGE TRAY TRIM BELT HOLE COVER

    Tech Tips

    Use the same procedure for all package tray trim belt hole covers.


    1. Engage the 2 guides.

    2. Engage the 2 claws to install the package tray trim belt hole cover.

  5. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  6. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  8. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side)

    Click here

  10. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  11. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  12. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  13. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  14. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. INSTALL REAR SEAT ASSEMBLY

    Click here