FRONT SEAT CUSHION HEATER(for Sedan) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. A012HBDC01
      *a

      Component without harness connected

      (Front Seat Cushion Heater Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      T3-1 - B-2 15 to 30°C (59 to 86°F) 0.81 to 0.99 Ω
      T3-2 - B-2 15 to 30°C (59 to 86°F) 0.81 to 0.99 Ω
      T3-4 - B-1 Always Below 1 Ω

      If the result is not as specified, replace the front seat cushion heater assembly LH.

  2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


    1. A012HBDC03
      *a

      Component without harness connected

      (Front Seat Cushion Heater Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      S3-1 - D-2 15 to 30°C (59 to 86°F) 0.81 to 0.99 Ω
      S3-2 - D-2 15 to 30°C (59 to 86°F) 0.81 to 0.99 Ω
      S3-4 - D-1 Always Below 1 Ω

      If the result is not as specified, replace the front seat cushion heater assembly RH.