LUMBAR SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT LUMBAR POWER SEAT SWITCH


    1. Install the front lumbar power seat switch to the front seat cushion shield with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }
  2. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  3. INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

    Click here

  4. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Click here

  5. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  6. CONNECT SEPARATE TYPE FRONT SEAT CUSHION COVER

    Click here

  7. INSTALL FRONT SEAT ASSEMBLY

    Click here