LUMBAR SWITCH INSPECTION

PROCEDURE


  1. INSPECT FRONT LUMBAR POWER SEAT SWITCH


    1. A00Y66JC01
      *A for LHD
      *B for RHD
      *1 Hold Switch
      *2 Release Switch
      *a

      Component without harness connected

      (Front Lumbar Power Seat Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Hold switch pressed Below 1 Ω
      3 - 1 Release switch pressed Below 1 Ω

      If the result is not as specified, replace the front lumbar power seat switch.