PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL PRE-CRASH SAFETY CITY BUZZER

   Note

   If the pre-crash safety city buzzer has been struck or dropped, replace it with a new one.

   
   

   1. 

      Engage the clamp to install the pre-crash safety city buzzer.

   2. Connect the connector.

      Tech Tips

      Make sure the connector and terminals are not deformed or corroded.

2. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

   Click here

3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here