AIRBAG CUT-OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A00Y5KRC01
      *a

      Component without harness connected

      (Airbag Cut Off Switch Cylinder Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      E86-2 (PMC+) - E86-1 (PMC-) Cut off switch in ON 360 to 440 Ω
      E86-2 (PMC+) - E86-1 (PMC-) Cut off switch in OFF 90 to 110 Ω

      If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.