PRE-CRASH SAFETY SYSTEM DIAGNOSIS SYSTEM


  1. CHECK DLC3


    1. Check the DLC3.

      Click here

  2. FUNCTION OF WARNING INDICATOR AND MESSAGE


    1. If the pre-crash safety system is not functioning properly, the driver is warned by the PCS OFF warning light and a warning message on the multi-information display in the combination meter assembly.

      Master Warning Light Multi-information Display PCS OFF warning light Detail DTC
      Illuminates "Check Pre-Crash Safety." Blinking This warning is displayed when the pre-crash safety city sensor detects a system malfunction ○

    2. Initial check


      1. The initial check occurs when the ignition switch is off for more than 2 seconds, and then turned to ON. The initial check consists of a pre-crash safety system diagnostic check with a duration of approximately 5 seconds.

      2. If a malfunction is detected during the initial check, "Check Pre-Crash Safety." will be displayed on the multi-information display in the combination meter assembly 5 seconds after the initial check is complete and the PCS OFF warning light will blink.

    3. Constant check


      1. The pre-crash safety city sensor constantly monitors the pre-crash safety system for malfunctions after the ignition switch is turned to ON and the initial check (approximately 5 seconds) has been completed.

      2. "Check Pre-Crash Safety." is displayed on the multi-information display in the combination meter assembly if the constant check detects a malfunction in the pre-crash safety system.