FRONT SEAT SIDE AIRBAG ASSEMBLY(for Hatchback, Wagon) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the front seatback frame sub-assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Engage the 2 clamps.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    Click here

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  4. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  5. INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

    Click here

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE

    Click here

  7. CONNECT FRONT SEAT AIRBAG ASSEMBLY

    Click here

  8. CONNECT SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  9. CONNECT SEPARATE TYPE FRONT SEAT CUSHION COVER

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY

    Click here

  11. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here