COMBINATION METER ASSEMBLY
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| E46-1 (RLMT)*1 - Body ground | G - Body ground | Rear seat belt warning light LH output signal | Ignition switch ON, rear seat belt warning light LH off | 11 to 14 V |
| Ignition switch ON, rear seat belt warning light LH on | Below 1 V | |||
| E46-2 (RCMT)*1 - Body ground | L - Body ground | Rear seat belt warning light center output signal | Ignition switch ON, rear seat belt warning light center off | 11 to 14 V |
| Ignition switch ON, rear seat belt warning light center on | Below 1 V | |||
| E46-3 (RRMT)*1 - Body ground | R - Body ground | Rear seat belt warning light RH output signal | Ignition switch ON, rear seat belt warning light RH off | 11 to 14 V |
| Ignition switch ON, rear seat belt warning light RH on | Below 1 V | |||
| E46-5 (SI) - Body ground | R - Body ground | Speed signal for other system (Input) | Ignition switch ON, wheel being rotated | Pulse generation (See waveform 1) |
| E46-6 (+S) - Body ground | V - Body ground | Speed signal for other system (Output) | Ignition switch ON, wheel being rotated | Pulse generation (See waveform 1) |
| E46-7 (P/SB) - Body ground | L - Body ground | Front passenger seat belt buckle switch signal | Ignition switch ON, front passenger seat occupied, and front passenger seat belt unfastened | Below 1 V |
| Ignition switch ON, front passenger seat occupied, and front passenger seat belt fastened | 11 to 14 V | |||
| E46-8 (S)*2 - Body ground | GR - Body ground | Fuel sediment warning signal | Ignition switch ON, fuel sediment warning light off*16, "DRAIN WATER FROM FUEL FILTER"*15 or "Drain water from fuel filter."*12 not displayed | 11 to 14 V |
| Ignition switch ON, fuel sediment warning light on*16, "DRAIN WATER FROM FUEL FILTER"*15 or "Drain water from fuel filter."*12 displayed | Below 1 V | |||
| E46-9 (S)*3 - Body ground | V - Body ground | Engine oil pressure signal | Engine started | 11 to 14 V |
| Engine not started | Below 1 V | |||
| E46-10 (WLVL)*9 - Body ground | SB - Body ground | Washer fluid level signal | Ignition switch ON, washer fluid level not low | 11 to 14 V |
| Ignition switch ON, washer fluid level low | Below 1 V | |||
| E46-11 (CHK) - Body ground | LG - Body ground | MIL (Check engine warning light) signal | Ignition switch ON, MIL (Check engine warning light) off | 11 to 14 V |
| Ignition switch ON, MIL (Check engine warning light) on | Below 1 V | |||
| E46-12 (SW) - Body ground | Y - Body ground | Brake fluid level signal | Ignition switch ON, brake fluid level not low (brake warning light off) | 11 to 14 V |
| Ignition switch ON, brake fluid level low (brake warning light on) | Below 1 V | |||
| E46-13 (CHG-)*4 - Body ground | L - Body ground | Charge warning signal | Ignition switch ON, charge warning light off*16 or "Charge warning (Charge warning symbol)"*15 or "Check charging system."*12 not displayed | Below 1 V |
| Ignition switch ON, charge warning light on*16, "Charge warning (Charge warning symbol)"*15 or "Check charging system."*12 displayed | 11 to 14 V | |||
| E46-14 (-)*11 - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| E46-16 (L) - E46-15 (E) | V - BR | Fuel level signal | Ignition switch ON, fuel level full | Below 1 V |
| Ignition switch ON, fuel level low (fuel level warning light on) | 4.5 to 9 V | |||
| E46-19 (+)*11 - Body ground | R - Body ground | High beam signal | Ignition switch ON, high beam off | Below 1 V |
| Ignition switch ON, high beam on | 11 to 14 V | |||
| E46-21 (ET) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| E46-22 (BRQ)*5 - Body ground | GR - Body ground | Transmission control ECU assembly communication line | Always | Below 1.44 V |
| E46-23 (TX+)*5 - Body ground | LG - Body ground | Transmission control ECU assembly communication line | Ignition switch ON | Pulse generation (See waveform 2) |
| E46-24 (RLSB)*1 - Body ground | Y - Body ground | Rear seat belt buckle switch LH signal | Ignition switch ON, rear seat belt LH unfastened | Below 1 V |
| Ignition switch ON, rear seat belt LH fastened | 11 to 14 V | |||
| E46-25 (RCSB)*1 - Body ground | L - Body ground | Rear seat belt buckle switch center signal | Ignition switch ON, rear seat belt center unfastened | Below 1 V |
| Ignition switch ON, rear seat belt center fastened | 11 to 14 V | |||
| E46-26 (RRSB)*1 - Body ground | R - Body ground | Rear seat belt buckle switch RH signal | Ignition switch ON, rear seat belt RH unfastened | Below 1 V |
| Ignition switch ON, rear seat belt RH fastened | 11 to 14 V | |||
| E46-27 (OILW)*10 - Body ground | SB*17 or G*18 - Body ground | Engine oil level signal | Ignition switch ON, engine oil level not low | 11 to 14 V |
| Ignition switch ON, engine oil level low | Below 1 V | |||
| E46-28 (SW1)*6, *11 - Body ground | R - Body ground | Steering pad switch assembly (DISP switch) signal | Ignition switch ON, DISP switch not pressed | 4 to 5 V |
| Ignition switch ON, DISP switch pressed | Below 1 V | |||
| E46-28 (SW1)*12 - Body ground | R - Body ground | Steering pad switch assembly signal | Ignition switch ON, enter, back and TRIP switches on steering pad switch assembly not pushed | 4.3 to 6 V |
| Ignition switch ON, enter switch on steering pad switch assembly pushed | Below 0.6 V | |||
| Ignition switch ON, back switch on steering pad switch assembly pushed | 2.3 to 3.2 V | |||
| Ignition switch ON, TRIP switch on steering pad switch assembly pushed | 1 to 2 V | |||
| E46-29 (TWS2)*7 - Body ground | P - Body ground | Temperature switch signal | Ignition switch ON, engine coolant temperature below 113°C (235°F) | Below 1 V |
| Ignition switch ON, engine coolant temperature 120°C (248°F) or more | 4.9 to 5.1 V | |||
| E46-31 (CANL) - Body ground | W - Body ground | CAN communication line | - | - |
| E46-32 (CANH) - Body ground | LG - Body ground | CAN communication line | - | - |
| E46-33 (MSSL)*12 - Body ground | W - Body ground | Steering pad switch assembly signal | Ignition switch ON, up, down, right and left switches on steering pad switch assembly not pushed | 4.3 to 6 V |
| Ignition switch ON, up switch on steering pad switch assembly pushed | 1 to 2 V | |||
| Ignition switch ON, down switch on steering pad switch assembly pushed | 2.3 to 3.2 V | |||
| Ignition switch ON, right switch on steering pad switch assembly pushed | 3.4 to 4.1 V | |||
| Ignition switch ON, left switch on steering pad switch assembly pushed | Below 0.6 V | |||
| E46-35 (TX1+) - E46-34 (TX1-) | G - W | Ambient temperature sensor signal | Ignition switch ON, ambient temperature 25°C (77°F) | 1.38 to 1.75 V |
| Ignition switch ON, ambient temperature 40°C (104°F) | 0.94 to 1.2 V | |||
| E46-36 (MSCH)*12, *13 - Body ground | G - Body ground | Local bus communication line | - | - |
| E46-37 (MSCL)*12, *13 - Body ground | GR - Body ground | Local bus communication line | - | - |
| E46-39 (IG+) - Body ground | P - Body ground | Ignition switch signal | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | |||
| E46-40 (B) - Body ground | W - Body ground | Battery | Always | 11 to 14 V |
| E45-1 (B) - Body ground | B - Body ground | Battery | Always | 11 to 14 V |
| E45-3 (HAZ) - Body ground | GR - Body ground | Hazard warning switch signal | Hazard warning signal switch not pressed | 11 to 14 V |
| Hazard warning signal switch pressed | Below 1 V | |||
| E45-7 (LR) - Body ground | L - Body ground | RH turn indicator light signal (Output) | Ignition switch ON, RH turn indicator light off | Below 1 V |
| Ignition switch ON, RH turn indicator light blinking | 11 to 14 V ←→ Below 1 V | |||
| E45-9 (ER) - Body ground | P - Body ground | RH turn indicator light signal (Input) | Ignition switch ON, RH turn signal switch off | 11 to 14 V |
| Ignition switch ON, RH turn signal switch on | Below 1 V | |||
| E45-10 (EL) - Body ground | LG - Body ground | LH turn indicator light signal (Input) | Ignition switch ON, LH turn signal switch off | 11 to 14 V |
| Ignition switch ON, LH turn signal switch on | Below 1 V | |||
| E45-11 (S)*11, *14 - Body ground | R - Body ground | Rear fog indicator light signal | Ignition switch ON, rear fog indicator light off | Below 1 V |
| Ignition switch ON, rear fog indicator light on | 11 to 14 V | |||
| E45-12 (FOG)*8, *11 - Body ground | G - Body ground | Front fog indicator light signal | Ignition switch ON, front fog indicator light off | Below 1 V |
| Ignition switch ON, front fog indicator light on | 11 to 14 V | |||
| E45-13 (LL) - Body ground | Y - Body ground | LH turn indicator light signal (Output) | Ignition switch ON, LH turn indicator light off | Below 1 V |
| Ignition switch ON, LH turn indicator light blinking | 11 to 14 V ←→ Below 1 V |
*1: w/ Rear Seat Belt Warning
*2: for Diesel
*3: except 8NR-FTS, Diesel
*4: w/o Generator Control ECU Assembly
*5: for Multi-mode Manual Transaxle
*6: w/ Steering Pad Switch
*7: w/ Exhaust Heat Recirculation System
*8: w/ Front Fog Light
*9: w/ Washer Fluid Level Warning
*10: for 8NR-FTS, 1ND-TV
*11: except Multi-information Display (Color Type)
*12: for Multi-information Display (Color Type)
*13: for Radio and Display Type
*14: w/ Rear Fog Light
*15: for Multi-information Display (Dot LCD Type)
*16: for Multi-information Display (Segment LCD Type)
*17: for Sedan
*18: for Hatchback, Wagon
Waveform 1 (Reference):
| Item | Condition |
|---|---|
| Tool setting | 5 V/DIV., 20 ms./DIV. |
| Vehicle condition | Ignition switch ON, wheel being rotated |
Tech Tips
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
Waveform 2 (Reference):
| Item | Condition |
|---|---|
| Tool setting | 2 V/DIV., 500 μs./DIV. |
| Vehicle condition | Ignition switch ON |