METER / GAUGE SYSTEM INITIALIZATION


  1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE (for Multi-information display (Segment LCD type))

    Tech Tips

    The ODO/TRIP DISP switch knob is located on the right side of the combination meter assembly.


    1. Turn the ignition switch to ON.

    2. Press the ODO/TRIP DISP switch knob until the TRIP A meter appears.

    3. Turn the ignition switch off.

    4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP DISP switch knob. Hold the ODO/TRIP DISP switch knob until the following conditions are met and 5 seconds have elapsed.


      1. The TRIP A meter shows "000000".

      2. The oil maintenance warning light goes off.

  2. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE (for Multi-information display (Dot LCD type))

    Tech Tips

    The ODO/TRIP switch knob is located on the right side of the combination meter assembly.


    1. Turn the ignition switch to ON.

    2. Press the ODO/TRIP switch knob until the TRIP A meter appears.

    3. Turn the ignition switch off.

    4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP switch knob. Hold the ODO/TRIP switch knob until the following conditions are met and 5 seconds have elapsed.


      1. The TRIP A meter shows "000000".

      2. The multi-information display shows that the reset is complete.