METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning, Display or Unit conversion.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Key Remind Sound Function to change the frequency of the key reminder warning buzzer Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
        Lane Change Flashing Times Setting Function to change the lane change flashing times 3 00:OFF,01:3,10:5,11:7 Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to change the ECO drive indicator zone*1, *2 ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the ODO display time after ignition switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

        Unit conversion
        Tester Display Description Default Setting ECU
        Units By Region Function to change the units on the display*2 km/l 000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g Combination meter assembly

        • *1: for CVT

          *2: for Multi-information Display (Segment LCD Type)