METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning, Display or Unit conversion.

      5. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.


        Warning
        Tester Display Description Default Setting ECU
        Key Remind Sound Function to change the frequency of the key reminder warning buzzer Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
        Lane Change Flashing Times Setting Function to change the lane change flashing times 3 00:OFF,01:3,10:5,11:7 Combination meter assembly

        Display
        Tester Display Description Default Setting ECU
        ECO Drive Indicator Zone Function to change the ECO drive indicator zone ON 0:OFF,1:ON Combination meter assembly
        ODO Display Time After IG OFF Setting Function to change the ODO display time after ignition switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly

        Unit conversion
        Tester Display Description Default Setting ECU
        Units By Region Function to change the units on the display km/l 000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g Combination meter assembly

    2. Customizing with the combination meter assembly (for Multi-information display (Segment LCD type))

      Tech Tips


      • Press and hold the ODO/TRIP DISP switch knob to enter an item.

      • Briefly press the ODO/TRIP DISP switch knob to select an item.


      1. Turn the ignition switch to ON.

      2. Enter the following menu: ODO meter.

      3. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.

        Settings
        Combination Meter Assembly Display Description Default Setting ECU
        ECO Function to activate/deactivate the eco driving indicator light ON OFF or ON Combination meter assembly

      4. Press and hold the ODO/TRIP DISP switch knob.

      5. Return to the item selection screen.

    3. Customizing with the combination meter assembly (for Multi-information display (Dot LCD type))

      Tech Tips


      • Press and hold the DISP switch knob to enter an item.

      • Briefly press the DISP switch knob to select an item.


      1. Turn the ignition switch to ON.

      2. Enter the following menu: SETTINGS.

      3. Select the setting by referring to the table below.

        Note

        Be sure to record the current value before customizing.

        Settings
        Combination Meter Assembly Display Description Default Setting Relevant ECU
        LANGUAGE Function to change the language on the display *1 English, French, German, Spanish, Italian, Portuguese, Russian, Turkish Combination meter assembly
        UNIT Function to change the units on the display *1 km (km/L), km (L/100km), miles (MPG) Combination meter assembly
        ECO INDICATOR Function to activate/deactivate the eco driving indicator ON OFF or ON Combination meter assembly

        • *1: Changes according to the vehicle specification

      4. Press and hold the DISP switch knob.

      5. Return to the item selection screen.