REAR DOOR COURTESY SWITCH(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

   
   

   1. Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

      Tech Tips

      There are 2 diameters for the "TORX" screws: 6 mm (0.236 in.) and 7 mm (0.276 in.). The diameter of a supplied "TORX" screw is 7 mm (0.276 in.).

   2. Connect the connector.

2. INSTALL REAR SEAT SIDE GARNISH

   Click here

3. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

   Click here

4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

   for LH Side:

   Click here

   for RH Side:

   Click here

5. INSTALL REAR DOOR SCUFF PLATE

   Click here

6. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

   Click here

7. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

   Click here

8. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)

9. INSTALL REAR SEAT HEADREST ASSEMBLY

10. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

11. INSTALL SPARE WHEEL COVER

    Click here