VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A00Y6YFC01
      *a Protective Tape

      Using a screwdriver, disengage the 2 claws to remove the vanity light lens.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A00Y7AOC01
      *a Protective Tape

      Using a screwdriver, disengage the claw as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Disengage the guide to separate the vanity light housing.

    4. Disconnect the connector to remove the vanity light housing.

  2. REMOVE VANITY LIGHT BULB


    1. Remove the vanity light bulb from the vanity light housing.