CUSTOMIZE LIGHTING SYSTEM (INT)
Customizing using the GTS
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Illuminated Entry.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lighting Time | Changes the lighting time when the illuminated entry system operates. | 15 s | 10:30 s,00:15 s,01:7.5 s | Main body ECU (Multiplex network body ECU) |
| I/L when ACC OFF | Lights up the lights that are controlled by the illuminated entry system when the ignition switch is turned from ACC or ON to off.*1 | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| I/L ON W/Door Key Unlock | Lights up the lights that are controlled by the illuminated entry system when the doors are unlocked using a mechanical key or door control transmitter.*1 | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Room Light when Aprchd | Lights up the lights that are controlled by the illuminated entry system when a key enters any actuation area around the doors.*1, *2 | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Interior Light Control | Lights up the lights that are controlled by the illuminated entry system.*1, *3 | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
*1: Refer to System Description for the lights that are controlled by the illuminated entry system.
*2: w/ Entry and Start System
*3: for Main Body ECU with 2 Connectors