LIGHTING SYSTEM SYSTEM DESCRIPTION


  1. ILLUMINATED ENTRY SYSTEM


    1. The illuminated entry system has the following control functions:

      Control Outline Lights that Operate
      Actuation Area-linked*1 When a registered key enters any actuation area around the doors, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Map Light Assembly

      • No. 1 Room Light Assembly*2
      When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.
      Door Lock/Unlock-linked When any door is unlocked, the lights that operate turn on.
      When all doors are locked, the lights that operate turn off.
      Door Open/Close-linked When any door is opened, the lights that operate turn on.
      When all doors are closed, the lights that operate turn off.
      Ignition Switch-linked When the ignition switch is turned from ON or ACC to off, the lights that operate turn on.
      When the ignition switch is turned from off to ON or ACC, the lights that operate turn off.
      Delay

      When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:


      • An actuation area-linked function is used.*1

      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the ignition switch is off.

      • The ignition switch is turned from ON to off when all doors are closed.

      • *1: w/ Entry and Start System

      • *2: w/ Room Light

  2. BATTERY SAVING FUNCTION


    1. The battery saving function has the following control functions:

      Control Outline Lights that Operate
      Battery Saving

      When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.

      Tech Tips

      Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


      • The ignition switch is turned to ON or ACC

      • Any door is opened and closed

      • The back door is opened and closed

      • Any door is unlocked

      • The key enters any exterior actuation area*1

      • Engine Switch Illumination*1

      • Map Light Assembly

      • No. 1 Room Light Assembly*2

      • No. 1 Luggage Compartment Light Assembly

      • Vanity Light Assembly*3

      • *1: w/ Entry and Start System

      • *2: w/ Room Light

      • *3: w/ Vanity Light