ROOM LIGHT REMOVAL

PROCEDURE

1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Slide Switch Type)

   
   
   1. 

      *a	Protective Tape
      *b	Front

      Using a screwdriver, disengage the 4 claws to remove the No. 1 room light lens.

      Tech Tips

      Tape the screwdriver tip before use.

   2. 

      *a	Protective Tape
      *b	Front

      Using a screwdriver, disengage the 4 claws as shown in the illustration to separate the No. 1 room light housing.

      Tech Tips

      Tape the screwdriver tip before use.

   3. 

      *a	Room Light Switch Base

      Disengage the clamp.

   4. Using a screwdriver, disengage the 4 claws to disconnect the room light switch base from the No. 1 room light housing.

2. REMOVE NO. 1 ROOM LIGHT BULB (for Slide Switch Type)

   
   

   1. Remove the No. 1 room light bulb from the room light switch base.

3. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Push Switch Type)

   
   

   1. 

      Using a moulding remover, disengage the 4 claws.

   2. Disconnect the connector to remove the No. 1 room light assembly.

4. REMOVE REAR ROOM LIGHT LENS RH (for Push Switch Type)

   
   
   1. 

      *a	Protective Tape

      Using a screwdriver, disengage the 3 claws to remove the rear room light lens RH.

      Tech Tips

      Tape the screwdriver tip before use.

5. REMOVE REAR ROOM LIGHT LENS LH (for Push Switch Type)

   Tech Tips

   Use the same procedure as for the RH side.

6. REMOVE NO. 1 ROOM LIGHT BULB (for Push Switch Type)

   
   

   1. Remove the 2 No. 1 room light bulbs from the No. 1 room light housing.