PERSONAL LIGHT REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT ASSEMBLY


    1. B0044NC

      Using a moulding remover, disengage the 4 clips and 4 claws.

    2. Disconnect the connector to remove the map light assembly.

  2. REMOVE MAP LIGHT BULB


    1. B004504

      Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration to remove them.

    2. Remove the 2 map light bulbs from the 2 map light sockets.

  3. REMOVE MAP LIGHT LOCK ASSEMBLY


    1. B0043JZC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the map light lock assembly as shown in the illustration.