VANITY LIGHT INSPECTION

PROCEDURE


  1. INSPECT VANITY LIGHT ASSEMBLY


    1. A00YB3OC06
      *a

      Component without harness connected

      (Vanity Light Assembly)

      Inspect the vanity light.


      1. Apply battery voltage to each terminal of vanity light assembly connector and check the operation of the vanity light.

        Result
        Connection Condition Specified Condition

        Battery positive (+) → 2 (B)

        Battery negative (-) → 1 (E)

        		 Vanity light switch on Vanity light comes on
        Vanity light switch off Vanity light does not come on

        If the result is not as specified, replace the bulb or vanity light assembly.