ELECTRICAL KEY OSCILLATOR(for Sedan Inside Luggage Compartment) REMOVAL

PROCEDURE


  1. REMOVE SPARE WHEEL COVER

    Click here

  2. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Fold the rear seatback assembly RH forward.

    2. A012L56

      Using a clip remover, remove the 3 clips.

    3. Turn back the separate type rear seatback cover RH as shown in the illustration.

    4. A012KMI

      Disengage the clamp.

    5. Disconnect the connector to remove the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.