SIMPLE INTELLIGENT PARKING ASSIST SYSTEM, Diagnostic DTC:C1694

DTC Code DTC Name
C1694 Steering Angle Initialization Incomplete

DESCRIPTION

This DTC is stored when the clearance warning ECU assembly judges that the steering angle has not been memorized.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1694 Steering Angle Initialization Incomplete Steering angle has not been memorized

  • Initialization

  • Clearance warning ECU assembly

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization may be needed. Refer to Initialization.

Click here

PROCEDURE


  1. PERFORM INITIALIZATION


    1. Perform initialization (initialize simple intelligent parking assist system).

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK DTC OUTPUT


    1. Clear the DTCs.

      Click here


      Body Electrical > Clearance Sonar / Simple-IPA. > Clear DTCs

    2. Recheck for DTCs and check if the same DTC is output again.


      Body Electrical > Clearance Sonar / Simple-IPA. > Trouble Codes
      OK
      No DTCs are output.

      Tech Tips


      • If DTC C1694 is output, perform initialization (initialize simple intelligent parking assist system) again.

      • If DTC C1694 is still output after performing initialization (initialize simple intelligent parking assist system) 3 times, replace the clearance warning ECU assembly.

      Result
      Proceed to
      OK
      NG

    OK

    END (INITIALIZATION HAS NOT BEEN PERFORMED)

    NG

    REPLACE CLEARANCE WARNING ECU ASSEMBLY for Hatchback LHD, Wagon LHD: Click here
    REPLACE CLEARANCE WARNING ECU ASSEMBLY for Hatchback RHD, Wagon RHD: Click here
    REPLACE CLEARANCE WARNING ECU ASSEMBLY for Sedan: Click here