RADIO RECEIVER(for Sedan) REMOVAL

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. A01TCBW

      Remove the 4 bolts.

    2. A01T8ER

      Pull the radio receiver assembly with bracket toward the rear of the vehicle and disengage the 2 guides.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  4. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Navigation System)

    Click here

  5. REMOVE NO. 1 NAVIGATION WIRE (w/ Navigation System)

    Click here

  6. REMOVE NO. 1 RADIO BRACKET


    1. w/o Navigation System:


      1. A01TD0D

        Remove the 3 screws and No. 1 radio bracket.

    2. w/ Navigation System:


      1. A01TA62

        Remove the 5 screws and No. 1 radio bracket.

  7. REMOVE NO. 2 RADIO BRACKET


    1. w/o Navigation System:


      1. A01TCJN

        Remove the 3 screws and No. 2 radio bracket.

    2. w/ Navigation System:


      1. A01TCIX

        Remove the 5 screws and No. 2 radio bracket.

  8. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

  9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

  10. REMOVE NAVIGATION ECU (w/ Navigation System)