AUDIO AND VISUAL SYSTEM(except Sedan Radio and Display Type) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

PROCEDURE


  1. CHECK IF A PROPER CD IS INSERTED


    1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      CD is normal.

      Tech Tips


      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

      Result
      Proceed to
      OK
      NG

    NG

    END (CD IS FAULTY)

    OK

  2. CHECK THAT CD IS INSERTED PROPERLY


    1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.
      Result
      Proceed to
      OK
      NG

    NG

    SET CD PROPERLY

    OK

  3. CLEAN CD AND RECHECK


    1. A00Y606

      Disc cleaning


      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

        OK
        Malfunction disappears.

        Note

        Do not use a conventional record cleaner or anti-static preservative.

      Result
      Proceed to
      OK
      NG

    OK

    END (CD WAS DIRTY)

    NG

  4. REPLACE CD AND RECHECK


    1. Replace the CD with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.
      Result
      Proceed to
      OK
      NG

    OK

    END (CD WAS FAULTY)

    NG

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here