PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 80*1 or 120*2 seconds before disconnecting the cable from the negative (-) battery terminal.
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.
| System Name | See Procedure |
|---|---|
| Simple Intelligent Parking Assist System | |
| Stop and Start System |
*1: w/ DVD Player
*2: w/o DVD Player
PRECAUTION FOR AUDIO AND VISUAL SYSTEM
If replacing any of the following parts, refer to Initialization of Repair Instruction.
Telematics transceiver*
*: w/ Manual (SOS) Switch
IGNITION SWITCH EXPRESSIONS
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) |
Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |