REAR BRAKE DISASSEMBLY

PROCEDURE

1. REMOVE REAR DISC BRAKE PISTON

   
   

   1. for Type B:

      
      

      1. 

         Using SST, remove the rear disc brake piston by turning it counterclockwise.

         SST

         09719-12010

         Note

         
         

         • Do not damage the rear disc brake piston.

         • Do not allow any brake fluid to spatter.

2. REMOVE CYLINDER BOOT

   
   

   1. for Type A:

      
      
      1. 

         *a	Protective Tape

         Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the rear disc brake cylinder and rear disc brake piston.

         Note

         Be careful not to damage the rear disc brake cylinder or rear disc brake piston.

   2. for Type B:

      
      

      1. Remove the cylinder boot from the rear disc brake cylinder.

3. REMOVE PISTON SEAL

   
   

   1. for Type B:

      
      
      1. 

         *a	Protective Tape

         Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the rear disc brake cylinder.

         Note

         Do not damage the inner surface or piston seal groove of the rear disc brake cylinder.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DISC BRAKE BLEEDER PLUG