VACUUM PUMP(for 1ZR-FAE) INSTALLATION

PROCEDURE


  1. INSTALL VACUUM PUMP ASSEMBLY


    1. A00Y6D5C01
      A00Y51D Engine Oil

      Apply engine oil to 2 new O-rings and install them to the vacuum pump assembly.

    2. A00YADHC02
      *a Coupling Teeth
      *b Groove
      A00Y51D Engine Oil

      Apply engine oil to the inner surface of the installation hole.

    3. Install the vacuum pump assembly so that the coupling teeth of the vacuum pump assembly and the groove of the camshaft are engaged.

      Note

      Ensure that the vacuum pump assembly is installed securely.

    4. A00Y7WO

      Install the 3 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      After tightening the bolts, ensure that the contact surface of the vacuum pump assembly is flush with the cylinder head.

    5. Connect the union to connector tube hose to the vacuum pump assembly and slide the clip to secure it.

  2. CONNECT ENGINE WIRE

    Click here

  3. OPERATION CHECK

    Click here