VACUUM PUMP(for 1ND-TV) INSTALLATION

PROCEDURE


  1. INSTALL VACUUM PUMP ASSEMBLY


    1. A01M02AC01
      A01M03W Engine Oil

      Apply engine oil to 2 new O-rings and install them to the vacuum pump assembly.

    2. A01LVI5C01
      *a Coupling Teeth
      *b Groove

      Install the vacuum pump assembly so that the coupling teeth of the vacuum pump assembly and groove of the camshaft are engaged.

      Note

      Ensure that the vacuum pump assembly is installed securely.

    3. A01LZ3Q

      Install 2 new bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      After tightening the bolts, ensure that the contact surface of the vacuum pump assembly is flush with the cylinder head.

    4. A01M16B

      Connect the union to connector tube hose to the vacuum pump assembly and slide the clip to secure it.

    5. Connect the vacuum hose to the vacuum pump assembly.

    6. A01LXQM

      Engage the 2 clamps to install the wire harness.

  2. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    w/o Glow Plug Controller: Click here

    w/ Glow Plug Controller: Click here

  3. OPERATION CHECK

    Click here