BRAKE BOOSTER(for LHD) REASSEMBLY

PROCEDURE


  1. INSTALL VACUUM SENSOR ASSEMBLY (w/ Stop and Start System)


    1. Install a new check valve grommet to the brake booster assembly.

    2. A00YA8FC01
      *a 35° +/- 4°
      A00YA05 Up

      Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.

  2. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. Install a new check valve grommet to the brake booster assembly.

    2. A00YAJQC01
      *a 90° +/- 4°
      A00YA05 Up

      Install the brake vacuum check valve assembly to the brake booster assembly as shown in the illustration.