BRAKE BOOSTER(for LHD) COMPONENTS
ILLUSTRATION
| *A | w/ Instrument Panel Under Cover | - | - |
| *1 | NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY | - | - |
ILLUSTRATION
| *A | for Type A Brake Booster Assembly | *B | w/ Combustion Type Power Heater |
| *C | for 1ND-TV, 8NR-FTS | *D | for 1WW |
| *E | for 1ND-TV | - | - |
| *1 | BRAKE BOOSTER ASSEMBLY | *2 | BRAKE BOOSTER GASKET |
| *3 | BRAKE PEDAL RETURN SPRING | *4 | CHECK VALVE TO CONNECTOR TUBE HOSE |
| *5 | FRONT NO. 1 BRAKE TUBE WAY | *6 | HEATER PUMP ASSEMBLY |
| *7 | LOCK NUT | *8 | NO. 3 BRAKE TUBE CLAMP |
| *9 | NO. 3 HEATER BRACKET SUB-ASSEMBLY | *10 | PUSH ROD PIN |
| *11 | BRAKE MASTER CYLINDER PUSH ROD CLEVIS | *12 | BRAKE TUBE HEAT INSULATOR |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Lithium soap base glycol grease | - | - |
ILLUSTRATION
| *A | for Type B Brake Booster Assembly | - | - |
| *1 | BRAKE BOOSTER ASSEMBLY | *2 | BRAKE BOOSTER GASKET |
| *3 | BRAKE PEDAL RETURN SPRING | *4 | CHECK VALVE TO CONNECTOR TUBE HOSE |
| *5 | FRONT NO. 1 BRAKE TUBE WAY | *6 | LOCK NUT |
| *7 | NO. 3 BRAKE TUBE CLAMP | *8 | PUSH ROD PIN |
| *9 | BRAKE MASTER CYLINDER PUSH ROD CLEVIS | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Lithium soap base glycol grease | - | - |
ILLUSTRATION
| *A | for Type A Brake Booster Assembly | *B | w/ Stop and Start System |
| *1 | BRAKE VACUUM CHECK VALVE ASSEMBLY | *2 | VACUUM SENSOR ASSEMBLY |
| *3 | CHECK VALVE GROMMET | *4 | BRAKE BOOSTER ASSEMBLY |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for Type B Brake Booster Assembly | - | - |
| *1 | BRAKE VACUUM CHECK VALVE ASSEMBLY | *2 | CHECK VALVE GROMMET |
| *3 | BRAKE BOOSTER ASSEMBLY | - | - |
| ● | Non-reusable part | - | - |