BRAKE MASTER CYLINDER(for LHD) DISASSEMBLY

PROCEDURE


  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Mount the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A012LX4

      Using an E7 "TORX" socket wrench, remove the "TORX" screw and brake master cylinder reservoir assembly from the brake master cylinder body.

      Note

      Do not drop the brake master cylinder reservoir assembly.

    3. Remove the brake master cylinder body from the vise.

    4. A012MBM

      Disengage the claw to remove the wire harness clamp.

  2. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER