BRAKE PEDAL(for LHD) REMOVAL

PROCEDURE


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD (for 1AD-FTV)

  2. REMOVE COMBINATION METER ASSEMBLY

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    for Sedan: Click here

    for Hatchback, Wagon: Click here

  5. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  6. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

    Click here

  7. SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY (for 1AD-FTV)


    1. Separate the No. 2 steering intermediate shaft assembly from the steering column assembly.

      Click here

  8. REMOVE BRAKE PEDAL RETURN SPRING


    1. A012LG8

      Remove the brake pedal return spring from the brake pedal support assembly and push rod pin.

  9. REMOVE PUSH ROD PIN


    1. A012J4P

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  10. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A012N8I

      Disengage the claw and slide the wire harness protector from the instrument panel junction block assembly.

    2. Disconnect the connector from the main body ECU and separate the wire harness protector.

    3. A012JXO

      Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement assembly.

    4. A012IEMC01
      *A for 1AD-FTV
      *a Brake Pedal Load Sensing Switch Connector

      Disengage the 2 clamps and separate the wire harness from the brake pedal support assembly.

    5. for 1AD-FTV:

      Disconnect the brake pedal load sensing switch connector.

    6. A012G03

      Remove the 4 nuts and brake pedal support assembly.

    7. A012I2Y

      Remove the nut from the brake pedal support assembly.