BRAKE PEDAL(for RHD) REMOVAL

PROCEDURE


  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Tech Tips

    Use the same procedure as for LHD.

    Click here

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

    Click here

  5. REMOVE BRAKE PEDAL RETURN SPRING


    1. A012LEJ

      Remove the brake pedal return spring from the brake pedal support assembly and push rod pin.

  6. REMOVE PUSH ROD PIN


    1. A012JPC

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A012HHP

      Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement assembly.

    2. A012MU0N01

      Disengage the clamp (a) and separate the wire harness from the brake pedal support assembly.

    3. for Manual Transaxle:

      Disengage the clamp (b) and separate the wire harness from the brake pedal support assembly.

    4. A012N2Y

      Remove the 4 nuts and brake pedal support assembly.

    5. A012IT5

      Remove the nut from the brake pedal support assembly.